Furnace Repair and Replacement in Bellingham, WA
Furnace Repair, Replacement and Installation in Bellingham, WA
Is your furnace not working as it should, blowing cold air, or making noises it never used to? Comfort Zone HVAC is locally owned by Jeff and Aubrey Hofer. We are your trusted HVAC company based in Bellingham. We do furnace repairs, furnace replacements and install gas and electric furnaces for homeowners across Bellingham and Whatcom County.
We start with a free in-home assessment and give you an honest evaluation as to whether a repair makes sense or whether it's time for a new furnace. We don't push sales and we don't upsell.
You don’t want to be without heat in the middle of winter – we understand that. That’s why we offer emergency service so you can rest easy knowing that someone will always be there to help you out, no matter what time of day or night it is.
Call (360) 319-2996 to speak with Jeff
- You get a free furnace assessment and quote
- A Licensed HVAC contractor, WA license #COMFOZH741DW
- Repairs on most major brands, including Carrier, Coleman and York
Get a free quote
Contact Us
Furnace Repair in Bellingham
Most furnace problems are not a big problem and cheaper to fix than homeowners expect. Bellingham's long, damp heating season keeps furnaces running from September to April. Or longer depending on your preferences. That wear shows up as worn igniters, dirty flame sensors and tired blower motors more often than as a failed furnace. Jeff or one of the technicians will find the actual cause, explain it, and give you a firm price before any work starts.
Here is a list of signs indicating your furnace needs repair
- It is blowing cold or lukewarm air when you are expecting heat
- The furnace is short cycling: this means that the furnace turns on and off every few minutes
- The furnace is constantly running without reaching your set temperature
- Alarming new noises such as banging, squealing, rattling or a loud "whoomp" at startup
- A burning or electrical smell that lasts more than the first few minutes of the season
- There is water pooling around a high-efficiency furnace (this is usually a clogged condensate line or pump issue)
- You notice a yellow or flickering burner flame instead of a steady blue one
- Sticker shop heating bills climbing with no change in how you use the furnace
- You are feeling uneven heat, with some rooms warm and others cold
As a precaution, if you smell gas you should leave the house right away and call your gas utility or 911 from outside. Call us once it's safe.
If you come across any of these signs, don't hesitate to get your furnace repaired. In the long run, it'll save you money and keep your home heated effectively and reliably. Our furnace repair service is second to none in Whatcom County! Jeff, Aubrey and the team will get your home back to comfortable in no time. Give us a call today for expert assistance and peace of mind for the coming winter.
We repair a wide range of furnace problems, including:
- Igniter and pilot assembly replacement
- Flame sensor cleaning and replacement
- Blower motor and capacitor replacement
- Inducer motor "draft motor" replacement
- Control board and limit switch repairs
- Pressure switch and condensate drain repairs
- Gas valve and burner cleaning or repairs
- Thermostat diagnosis and replacement or upgrade to wifi connected thermostat
- Heat exchanger inspection and safety checks
If we find a cracked heat exchanger or another serious safety issue, we'll explain the problem and your options before moving forward with any repairs.
No heat? Our emergency furnace repair process
We know that losing heat in a Bellingham, Ferndale or Lynden cold snap isn't something that can wait until next week. Call us any day of the week for an emergency call out.
Furnace Replacement in Bellingham
There comes a point in time where repair is not the smart move anymore. If your furnace is near the end of its life, keeps breaking down, or is a safety concern, a furnace replacement will cost less over time than patching it every winter. At Comfort Zone HVAC, we help you choose the right size and efficiency of furnace for your home after removing the old unit. You get a clear, written quote before you decide anything.
Should you repair or replace? We can help you decide
After the assessment, we look at four things:
- The Age of your system. Most furnaces last about 15–20 years. We have seen some almost 30 years old and still operational. But past 15, a major repair often isn't worth it.
- The repair cost. A common rule of thumb: if the repair costs more than about half the price of a new furnace, replacement usually wins and you get more peace of mind and no emergency callouts next year or a repeat call out the same year.
- Safety. A cracked heat exchanger or any carbon monoxide risk means replacement, not repair.
- Efficiency and comfort. An older 80% AFUE furnace burns noticeably more gas than a modern high-efficiency model. Rooms that are never comfortable can point to a sizing problem that repairs won't fix. The company that installed the original furnace did not size it correctly.
If furnace repair makes sense, we'll be honest and say so. Plenty of our customers get several more good years out of a well-maintained furnace.
What's included in a furnace replacement
- Free in-home assessment and load sizing (not just matching the old unit's size)
- A written quote from us with the discussed options.
- We include removal and disposal of the old furnace
- Installation of the new furnace, thermostat and venting
- Startup testing, safety checks and a walkthrough of your new system. New furnaces can have a "burn off" odor the first time running it. You may have you open windows when firing up the furnace the first time. These are smells from manufacturing oils and are non toxic.
Furnace Installation in Bellingham and all of Whatcom County
Need a new furnace? We're here to help. We understand that it can be a big decision, which is why we work with you every step of the way. All the way from choosing the right unit to installing it properly. Our team, led by expert technician Jeff Hofer, has years of experience when it comes to furnace installation in Bellingham WA. We know just what to do to get your home heated quickly and efficiently.
Whether you're replacing a old worn out unit, moving from oil or electric baseboard heat to modern equipment, we are here for you. Even fi you are adding a furnace to a remodel, we handle furnace installation from start to finish. A furnace is only as good as its installation. Correct sizing, gas line work, venting, ductwork connections and airflow settings decide how well it heats your home and how long it lasts.
Should you get a gas or electric furnace?
Gas furnaces cost more to install but usually less to run, and they heat quickly and evenly. They're a strong fit if your home already has natural gas service. At Comfort Zone HVAC, we install high-efficiency 95%+ AFUE gas furnaces. Utility rebates may be available for high-efficiency models.
Electric furnaces are cheaper to install and don't need a gas line, but they cost more to run. Many Bellingham homeowners pair a furnace with a heat pump in a dual-fuel system. The heat pump handles our mild, damp days efficiently, and the furnace takes over during hard freezes.
Not sure which fits your home? We'll look at your existing system, ductwork and heating costs and give you a straight recommendation. If your home doesn't have ducts, ductless heat pumps may be the better path for you. You can always give us a call and speak with an experienced tech over the phone.
Why Bellingham Residents have Chosen Comfort Zone HVAC
We have lived and worked in this area since the 1990's. We have roots in this community and support the local businesses and teams. Here are a few other reasons give us a call.
- We are locally owned and operated. Comfort Zone is run by Jeff and Aubrey, a local married couple based right here in Bellingham. Bellingham is where we call home.
- We give you our honest recommendations. We'll never sell you a furnace system you don't need.
- We always give free assessments. You know the problem and the price before we start.
- We are an honest local licensed HVAC contractor. Check out our WA license #COMFOZH741DW.
- We work on all major brands. Repair, replacement and new installation.
What our customers say
★★★★★
"I called because our furnace stopped working during some cold weather, and we needed help right away. Jeff responded quickly and got our heat back on, even though replacement parts were needed. Many companies would have told us we had to wait until the new parts arrived, but not Jeff. He made sure we had heat first and then came back to replace the necessary parts. We're very grateful for his prompt service and dedication. Thank you, Jeff!" — Jarred H., Google Review
★★★★★
"Jeff and his team did fantastic work installing a new furnace! Extremely knowledgeable, honest, and professional. We will always use Comfort Zone HVAC for our future needs." — Teresa R., Google Review
★★★★★
"Outstanding customer service and prompt work! My furnace quit working and Jeff was able to come and fix it quickly! Highly recommend them to anyone." — Jeff W., Google Review
Furnace service areas
We provide furnace repair, replacement and installation throughout Bellingham, including Fairhaven, Sehome, Cordata, Barkley, Silver Beach, Edgemoor and Happy Valley. We also serve the rest of Whatcom County:
Ferndale · Lynden · Blaine · Everson · Sudden Valley · Birch Bay · Nooksack
Furnace Repair and Replacement FAQs
How much does furnace repair cost in Bellingham?
It depends on the part and the labor involved. Also price of parts and materials rapidly change with current economic conditions.A flame sensor cleaning or igniter replacement costs far less than a blower motor or control board. That's why we start with a free assessment and give you a firm quote before any work begins.
How much does a new furnace cost?
Furnace replacement cost depends on the furnace type (gas or electric), efficiency rating, home size, and whether venting, gas line or ductwork changes are needed. We give written quotes with options at different price points so you can choose what fits your budget. We will talk to you about your options. Prices changes happen often with manufacturer pricing structure changes.
Should I repair or replace my 15-year-old furnace?
Not usually but depends on our evaluation. If the furnace has been maintained, the heat exchanger is sound and the repair is minor, repairing it is often the better value. If you're facing a major repair on a furnace older than about 15 years, replacing it usually saves money over the next few winters. We'll give you an honest recommendation either way.
Why is my furnace blowing cold air?
Some coommon causes are a dirty flame sensor, a failed igniter, a clogged filter tripping the high-limit switch, a blocked condensate line on high-efficiency furnaces, or as simple as your thermostat set to "fan on." Check the filter and thermostat first. If that doesn't fix it, give us a call.
How long does furnace installation take?
Most straightforward furnace replacements are completed in about 1-2 days. Jobs that need new venting, gas line work or ductwork changes can take longer. We'll give you a timeline with your quote.
Do you repair all furnace brands?
We repair most major furnace brands, including Coleman, Carrier, Bryant and York, and we service both gas and electric furnaces.
How often should my furnace be serviced?
Once a year, ideally in early fall before the heating season. Annual maintenance catches small problems early, helps keep your warranty valid, and helps your furnace last longer.
We do furnace repair and replacement.
Make sure you do your diligence before hiring an HVAC Contractor. Get someone that has roots and will be around to service your equipment after the installation.